Thread former For W.TEC® INSERT COIL helical inserts - made of HSCo; shape C
Thread mould, HSCo, shape C
THRMOULD-HELCINRT-HSCO-M10
Register now and access more than 125,000 products
Your benefits
- Moulded thread with higher load capacity
- Improved surface quality
- No chipping problems
- Higher cutting speeds than thread cutting
- Longer service life than screw taps
Datasheets(X)
- Stainless steels up to 950 N/mm²
- Construction steels up to 800 N/mm²
- Heat-treated steels up to 1000 N/mm²
- Aluminium, copper and zinc alloys
Material | High-speed steel with 5% cobalt content |
Form | C |
Tolerance class | 6H modified |
Suitable for thread insert | M10 |
Thread diameter | 11.99 mm |
Thread length | 22 mm |
Core hole diameter | 11.2 mm |
Length | 100 mm |
Square width | 7 mm |
Shank diameter | 9 mm |
| Reference values for determining cutting speed for W.Tec® insert coil thread former | |||
| Material | Strength | Cutting speed in m/min | Recommended lubrication |
| Structural steels, carbon steels, cold extrusion steels etc. | < 600 N/mm² | 20 - 80 | Cutting oil/emulsion |
| Structural steels, case-hardening steels, cast steel etc. | < 800 N/mm² | 20 - 60 | Cutting oil/emulsion |
| Heat-treated steels, cold working steels, nitriding steels etc. | < 1000 N/mm² | 10 -40 | Cutting oil |
| Stainless steel (austenitic, ferritic, martensitic) | < 950 N/mm² | 10 -25 | Cutting oil |
| Aluminium wrought alloys | < 550 N/mm² | 15 - 40 | Cutting oil/emulsion |
| Aluminium cast alloys | Si < 12 % | 15 - 40 | Cutting oil/emulsion |
| Pure copper | < 400 N/mm² | 20 - 40 | Cutting oil/emulsion |
| Brass (copper-zinc alloy) | < 550 N/mm² | 40 - 80 | Emulsion |
| Cutting speed [m/min] = (external diameter x π x speed)/1000 Speed n [rpm] = (cutting speed in m/min x 1000)/(external diameter x π) Feed [mm/min] = speed x thread pitch The cutting speeds indicated above are to be understood as reference values and may vary depending on the machining conditions and must be adjusted accordingly. | |||
Last viewed
Hexagon Socket Head Cap Screw ISO 4762, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HA shank
Solid carbide end mill, short, quad blade
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Installation box, bath tub, flush-mounted mixer, masonry
Compact workshop trolley
PVC single core H05/H07V-K, fine wire
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Collecting bottle For brake fluid
Twist drill bit HSCo DIN 340 type RN OXIDE