Thread mandrel With nozzle
Threaded mandrel with nozzle for rivet nuts FRH/CH
THRMNDRL-(F.0917101)-NOZ-PANHD-M6
ZEBRA
Register now and access more than 125,000 products
Conduct your own tests before using non-Würth rivet nuts.
Attention! The use of the M8 thread mandrel is limited to the rivet nuts listed as accessories.
Datasheets(X)
Material | Steel |
Surface | 0 - not applicable |
Thread type x nominal diameter | M6 |
Nominal diameter | 6 mm |
Suitable for thread | M6 |
Last viewed
Rivet nut
Work trousers
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Medium combination top wedge
Heat-resistant crepe masking tape +120 °C
Spiral clamping pin, heavy-duty design ISO 8748 steel plain
W-TEC® INSERT COIL — tang break-off tool
Colour – blind rivets Round pan head
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
AL 900 door handle on outer plate With cylinder cover