Thread mandrel With nozzle
Threaded mandrel with nozzle for rivet nuts FRH/CH
THRMNDRL-(F.0917101)-NOZ-PANHD-M6
ZEBRA
Register now and access more than 125,000 products
Conduct your own tests before using non-Würth rivet nuts.
Attention! The use of the M8 thread mandrel is limited to the rivet nuts listed as accessories.
Datasheets(X)
Material | Steel |
Surface | 0 - not applicable |
Thread type x nominal diameter | M6 |
Nominal diameter | 6 mm |
Suitable for thread | M6 |
Last viewed
THM 439 holding magnet
Cover cap for screws with head recess
Pneumatic blind rivet gun PNG 102
Friction drill bit Standard with collar
Hexagon bolt with shank
Twist drill bit HSCo DIN 338 MFD Speed
Low-cut safety shoes, S3
Male thread plug-in nipple
Stud with threaded end ≈ 1.25 d
Replacement seal For 20 litre fuel canister