Thread-rolling screw
DIN 7500-1 steel zinc plated cs head TX shape ME
SCR-CS-DIN7500-ME-TX10-(A2K)-M3X16
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
- Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M3 |
Length (l1) | 16 mm |
Head diameter (dk) | 5.5 mm |
Head height (k1) | 1.65 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | TX10 |
Thread type | Metric thread |
Thread design | 0 - not applicable |
Form | ME |
Head type | Countersunk head |
Head details | 0 - not applicable |
Property class | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Safety boots, S2
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank
Heavy-duty box wrench Metric, depressed centre
Protective hood
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Marking gauge Made of stainless steel with hardened marking edge and millimetre graduation
Countersunk head screw with recessed head, H
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
HSCo Multi Performance machine tap for through holes DIN 371/376