Thread-rolling screw
DIN 7500-1 steel zinc plated flat head Z shape CE
SCR-PANHD-DIN7500-CE-Z0-(A2K)-M2X10
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M2 |
Length (l1) | 10 mm |
Head diameter (dk) | 4 mm |
Head height (k1) | 1.6 mm |
Head type | Pan head |
Material | Steel |
Property class | 0 - not applicable |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | Z0 |
Standards | DIN 7500 |
RoHS-compliant | Yes |
Last viewed
Window sill duct, FB
1/2 inch impact socket wrench insert hexagon, metric, short
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Taper pins with external thread, unhardened DIN 8737, steel, plain
Conical countersink HSS Ruko DIN 335 plain ALU form C
Hexagonal bolt with flange DIN 6921, steel 10.9, zinc-plated, blue passivated (A2K)
Oil drain plug
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Stepped drill bit