Thread-rolling screw
DIN 7500-1 steel zinc plated flat head Z shape CE
SCR-PANHD-DIN7500-CE-Z0-(A2K)-M2X4
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
 | |
Thread type x nominal diameter (d1) | M2 |
Length (l1) | 4 mm |
Head diameter (dk) | 4 mm |
Head height (k1) | 1.6 mm |
Head type | Pan head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | Z0 |
Standards | DIN 7500 |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Short sanding belt Klingspor LS 309 XH
Partial exoskeleton Ottobock CX Soft Wrist wrist support
Work vest
Flat cover cap for RW recess
pias® drilling screw, raised countersunk head with AW drive
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376
Hexagonal bolt with thread up to the head
Cut-resistant glove
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Carbide bur assortment STEEL cut
