Thread-rolling screw
DIN 7500-1 steel zinc plated flat head Z shape CE
SCR-PANHD-DIN7500-CE-Z0-(A2K)-M2X6
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M2 |
Length (l1) | 6 mm |
Head diameter (dk) | 4 mm |
Head height (k1) | 1.6 mm |
Head type | Pan head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | Z0 |
Standards | DIN 7500 |
RoHS-compliant | Yes |
Last viewed
Transport rollers For aluminium standing ladder with steps, riveted/aluminium single ladder with steps, riveted
Work shirt, long-sleeved
Hexagonal cap nuts, high profile DIN 1587, polyamide 6.6, natural
Sanding disc film Mirka Novastar
Shoelaces
Horizontal cable guide For desks
Work dungarees
Slotted countersunk head screw DIN 963, brass, plain
System workbench 1500 mm with 2 height-adjustable workbench feet and hinged door wall-mounted cabinet 8.6
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel