Thread-rolling screw
DIN 7500-1 steel zinc plated flat head Z shape CE
SCR-PANHD-DIN7500-CE-Z1-(A2K)-M2,5X16
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M2.5 |
Length (l1) | 16 mm |
Head diameter (dk) | 5 mm |
Head height (k1) | 2.1 mm |
Head type | Pan head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | Z1 |
Standards | DIN 7500 |
RoHS-compliant | Yes |
Last viewed
Manual drive-in stud With small collar
Welding glove
Work dungarees
Hexagon nut, high profile with clamping piece (non-metal insert), inch
Welding electrode Inox 4 red
ABS 18 SUBCOMPACT M-CUBE cordless drill/driver
Twist drill bit, metal Ruko DIN 338 type N HSCo golden with offset shank
Securing shackle W-GFIXB 927
Metric double box-end wrench Hexagon with POWERDRIV®
Mechanical screw-in tool For spigot hinges consisting of two and three pieces