Thread-rolling screw
DIN 7500-1 steel zinc plated flat head TX shape PE
SCR-PANHD-DIN7500-PE-TX25-(A2K)-M5X6
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 6 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3.7 mm |
Head type | Pan head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | TX25 |
Standards | DIN 7500 |
RoHS-compliant | Yes |
Last viewed
Wire cable with ending and trapezoidal plate hook
WÜPOFAST® steel zinc-plated blue chipboard screw With combination slot
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Hexagonal bolt
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Work trousers
Battery For MLLG 18
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)