Thread-rolling screw
DIN 7500-1 steel zn ptd. black flat hd Z shape CE
SCR-RSD-DIN7500-CE-Z2-(A2R)-M5X10
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M5 |
Length (l1) | 10 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3.7 mm |
Head type | Pan head |
Material | Steel |
Surface | Zinc plated black |
Thread type | Metric thread |
Internal drive | Z2 |
Standards | DIN 7500 |
RoHS-compliant | No |
Last viewed
Separator set For bottom trays in aluminium service cases
Hammer drill bit Plus Duo-S Vario
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hard hat, accessories Centurion sun and neck protection S51HVY
Specially fused alumina sanding tip, pink
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Installation accessories for 3D hinges
piasta® drilling screw, round head with recessed head
Thread-rolling screw
Concrete grinder EBS 125-E