Threaded fitting
ASME B18.31.2 with 2 nuts stainless steel D60 3.1
Q/STUD-NUT-WSH-D60-8UN1 7/8X410-SP+3.1
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Nuts according to ASME B18.2.2, heavy-duty design
- Washers comply with ASME PCC-1-2010
- Nuts and washers are assembled
Datasheets(X)
 | |
Nominal diameter | 1-7/8 in |
Length | 410 mm |
Thread type | Unified thread (US, UK, CA) |
Number of thread starts per inch | 8 |
Surface | Plain |
Material | Stainless steel |
Last viewed
Mould release agent For thermoplastics and thermosetting plastics
HPC end mill with corner radius, Speedcut 4.0-Inox, long, optional, four cutting edges, uneven angle of twist gradient
System insert 4.4.1, empty compartment
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Low-cut safety shoes, S1
Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised
Door handles Flat on exterior plate
Knob Mushroom-shaped
Hexagon head bolt With thread up to head, structural bolting assembly, DIN EN 15048-1
Work shirt Olymp Luxor Comfort Fit Daikin