Threaded fitting
ASME B18.31.2 with 2 nuts stainless steel D60 3.1
Q/STUD-NUT-WSH-D60-UNC1/2X100-SPE+3.1
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Nuts according to ASME B18.2.2, heavy-duty design
- Washers comply with ASME PCC-1-2010
- Nuts and washers are assembled
Datasheets(X)
 | |
Nominal diameter | 1/2 in |
Length | 100 mm |
Thread type | UNC |
Number of thread starts per inch | 13 |
Surface | Plain |
Material | Stainless steel |
Last viewed
Paint spray, silk gloss
Threaded mandrel with chuck
Work jacket
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Pipe clamp TIPP® Smartlock 2 GS Without rubber inserts
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Straight push-in fitting with female thread
Hexagonal bolt
Fleece sanding belt For electric grinding file