Threaded fitting
ASME B18.31.2 with 2 nuts stainless steel D60 3.1
Q/STUD-NUT-WSH-D60-UNC1/2X110-SPE+3.1
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Nuts according to ASME B18.2.2, heavy-duty design
- Washers comply with ASME PCC-1-2010
- Nuts and washers are assembled
Datasheets(X)
 | |
Nominal diameter | 1/2 in |
Length | 110 mm |
Thread type | UNC |
Number of thread starts per inch | 13 |
Surface | Plain |
Material | Stainless steel |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
ASME B18.21.1 steel zinc-plated yellow
Pan head tapping screw with flange
Work trousers
Door closer STS 340 with lock arm
Low-cut safety shoes, S1
Multi-function shelf
L-shaped push-in fitting
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head