Threaded fitting
ASME B18.31.2 with 2 nuts stainless steel D60 3.1
Q/STUD-NUT-WSH-D60-UNC3/4X120-SPE+3.1
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Nuts according to ASME B18.2.2, heavy-duty design
- Washers comply with ASME PCC-1-2010
- Nuts and washers are assembled
Datasheets(X)
 | |
Nominal diameter | 3/4 in |
Length | 120 mm |
Thread type | UNC |
Number of thread starts per inch | 10 |
Surface | Plain |
Material | Stainless steel |
Last viewed
WÜPLAST® pan head screw with Z Phillips head WN 1412, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
Protective glove, disposable
Turnbuckle sleeve produced from steel tube DIN 1478 (made from steel tube), steel L235 (S235JR), hot-dip galvanised (hdg)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Raised countersunk head screw with recessed head, H ISO 7047, steel 8.8, zinc-nickel-plated, silver (ZNSHL)
Split pin ISO 1234 A4-70 stainless steel, plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Shelf ORSY®Flex
Work trousers