Threaded fitting
ASME B18.31.2 with 2 nuts stainless steel D60 3.1
Q/STUD-NUT-WSH-D60-UNC3/4X160-SPE+3.1
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Nuts according to ASME B18.2.2, heavy-duty design
- Washers comply with ASME PCC-1-2010
- Nuts and washers are assembled
Datasheets(X)
 | |
Nominal diameter | 3/4 in |
Length | 160 mm |
Thread type | UNC |
Number of thread starts per inch | 10 |
Surface | Plain |
Material | Stainless steel |
Last viewed
TIPP® fixed point bracket 2 pieces
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Silicone acetate
French cabinet hinge
Steel zinc plated grade 5
Flat washer For hexagon head bolts and nuts DIN 125, hot-dip galvanised steel (hdg), hardness class 140 HV
Hexagon Socket Head Cap Screw
ORSY®BULL partition element basic set For dividing ORSY®BULL top loader boxes according to requirements
Cover cap For hexagon head bolts/nuts
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly