Threaded fitting
ASME B18.31.2 with 2 nuts stainless steel D60 3.1
Q/STUD-NUT-WSH-D60-UNC5/8X90-SPE+3.1
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Nuts according to ASME B18.2.2, heavy-duty design
- Washers comply with ASME PCC-1-2010
- Nuts and washers are assembled
Datasheets(X)
 | |
Nominal diameter | 5/8 in |
Length | 90 mm |
Thread type | UNC |
Number of thread starts per inch | 11 |
Surface | Plain |
Material | Stainless steel |
Last viewed
Hexagonal cap nut with clamping piece (non-metallic insert), fine thread DIN 986
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Clamping pin/clamping sleeve
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain
Flat paintbrush For solvent-based lacquer and paint systems
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Fibreglass rod For CPS cable feed device
Combination adapter A4/A2 for cylinder saw
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)