Threaded pin DIN 553, A1 stainless steel, plain
DIN 553 plain A1 stainless steel
SCR-CONEPT-DIN553-A1-SL-M2X3
Register now and access more than 125,000 products
DIN 553 has been withdrawn and replaced by ISO 7434. There is some similarity (nominal diameter for M1, M1.4 removed).
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M2 |
Length (l1) | 3 mm |
Tip diameter (d2) | 0.2 mm |
Standards | DIN 553 |
Material | Stainless steel A1 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.4 mm |
Thread form | Standard metric thread |
Shape of tip | Tip |
Last viewed
Twist drill SC, WN 20, type N, internal cooling, TiAlN-UV
Engine oil TRIATHLON® Endurance III 5W-30
Tensioning washer DIN 6796, spring steel, zinc flake, silver (ZFSH)
ETS 64 R IMR with slide rail, single leaf
All-round paint spray gun AP HVLP
Jacket Planam Highline
Low-cut safety shoes, S3
Hexagonal bolt with shank
Bevelled-edge chisel In accordance with DIN 5139
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated