Threaded pin ISO 4027, steel, 45H, plain
ISO 4027 steel 45H plain
SCR-PT-ISO4027-45H-HS12-M24X60
Register now and access more than 125,000 products
Hardness class 45H corresponds to a hardness of 450 HV
The standard tip has an angle of 90°, but very short lengths have an angle of 120°.
ISO 4027 replaces DIN 914 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Improper application is likely if set screws are welded, tightened and secured with nuts or subjected to bending. Any application of tensile stress is considered improper use and can result in malfunction.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 60 mm |
Tip diameter (d2) | 6 mm |
Internal drive (s1) | HS12 |
Angle of the tip | 90 Degree |
Standards | ISO 4027 |
Material | Steel |
Hardness category | 45H |
Surface | Plain |
Drive type | Hexagon socket |
Shape of tip | Tip |
RoHS-compliant | Yes |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Slotted countersunk head screw DIN 963, brass, plain
Oval cupboard railing seamlessly welded
Work trousers
Work trousers
Ducting clamp Part 3 – Double series
Spindle-mounted round wheel brush drill Klingspor BRS 600 W
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Socket wrench assortment 23 pieces
Button-head rivet DIN 660, A2 stainless steel
Hexagon nut BILOC self-locking low profile
