Threaded rod ASME B18.31.2 with 2 nuts and washers, plain Duplex D57X stainless steel with 3.1 certification
ASME B18.31.2 w/ 2 nuts Duplex sst D57X3.1
Q/STUD-NUT-WSH-D57XL-UNC3/4X435-SPC+3.1
Art.-no. 4947119435
EAN 4055374448084
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Nuts according to ASME B18.2.2, heavy-duty design
- Washers comply with ASME PCC-1-2010
- Nuts and washers are assembled
Datasheets(X)
 | |
Nominal diameter | 0.75 in |
Length | 435 mm |
Thread type | UNC |
Property class | MDS D57X |
Number of thread starts per inch | 10 |
Surface | Plain |
Material | MDS D57X |
Last viewed
Cutting disc for stainless steel big pack
Industrial hand brush Arenga/Elaston for coarse and fine dirt outdoors
Round wire snap ring and snap ring groove for drill holes DIN 9926, steel plain
Fire-retardant plugs With pipe shell
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-plated, blue passivated (A2K)
Work pullover Kübler hooded sweat jacket 5022 6330
ELMO® speed screws Zinc-plated steel, blue, RW slot drive
Sealant remover
Hexagon nut, inch
Flat washer without chamfer ISO 7089 steel 300 HV, zinc-plated, blue passivated (A2K)