Threaded rod
DIN 976-1 steel 8.8U hot dip galv. shape A w. 3.1
Q/THRROD-DIN976A-8.8U-HDG-M20X2000+3.1
Register now and access more than 125,000 products
The threaded rods are manufactured with an undersized thread in tolerance class 6AZ before the surface protection is applied. These threaded rods are ISO-compliant after hot-dip zinc-plating. This means they fit hot-dip zinc-plated nuts with thread tolerance 6H.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M20 |
Length (l1) | 2000 mm |
Standards | DIN 976 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Thread type | Metric thread |
RoHS-compliant | Yes |
Last viewed
U-guide for guide bearing
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Welder clothing
System workbench 1500 mm with 1 workbench foot and drawer undercounter cabinet 8.6
Stretch X Electric SB P E FO WRU safety shoe
System workshop trolley BASIC 8.4
DUO wire end ferrule With plastic sleeve
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series