Threaded rod
DIN 976-1 steel 8.8U hot dip galv. shape A w. 3.1
Q/THRROD-DIN976A-8.8U-HDG-M24X2000+3.1
Register now and access more than 125,000 products
The threaded rods are manufactured with an undersized thread in tolerance class 6AZ before the surface protection is applied. These threaded rods are ISO-compliant after hot-dip zinc-plating. This means they fit hot-dip zinc-plated nuts with thread tolerance 6H.
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M24 |
Length (l1) | 2000 mm |
Standards | DIN 976 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
Thread type | Metric thread |
RoHS-compliant | Yes |
Last viewed
Hexagon head sealing plug, short screw-in pin DIN 7604, steel, plain
Stud with threaded end ≈ 2d
Die For standard metric ISO thread HSCo Multi Performance
Hexagonal bolt with shank and fine thread
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Hexagon Socket Head Cap Screw
Work trousers
Tubular rivet shape A
FLEXEN® Cold rubber endless pipe insulation
Round wire snap ring and snap ring groove for drill holes