Threaded rod
ASME B18.31.2 w. 2 nuts steel L7/SZ.7 tzn w. 3.1
STUD-NUT-L7/GR7-HDG-2_8X760-SP+LOT-3.1
Register now and access more than 125,000 products
- Threaded fitting according to ASME B18.31.2
- Strength of threaded fittings L7 from 2 1/2 inch diameter L43 according to ASTM A320
- Nuts according to ASME B18.2.2
- Strength of nuts GR.7L complies with ASTM A194
- Nuts are assembled
Datasheets(X)
 | |
Nominal diameter | 2 in |
Length | 760 mm |
Thread type | UNF |
Property class | L7/GR.7 |
Number of thread starts per inch | 8 |
Surface | Hot dip galvanized |
Material | Steel |
Last viewed
90° elbow with female thread EN10242 A1, hot-dip galvanised malleable iron
Heat protection glove Uvex HexArmor Chrome SLT™ 4062
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
Oil filter drain tool set For 1.8 and 2.0 L FSI and TFSI
Remote filter system SR 905 Sundström
Flat washers with large external diameter
1/4-inch socket wrench insert, TX head For external TX screws
Hexagonal bolt with shank
Twist drill bit HSCo DIN 340 type RN OXIDE
Straight plug connector For commercial vehicles