Through-hole machine screw taps Ruko M DIN 376 HSCo VAP form B
MATAP-RUKO-232061VA-CO5-M6X1,00MM
Art.-no. 1971004217
EAN 4007140285898
Register now and access more than 125,000 products
The thread is cut in one operation.
"Vaporising" refers to the evaporation of a non-metallic oxide layer. Vaporising acts as a separating layer and reduces the formation of cold welds. Cold welds involve chips of material that weld onto the edge of the screw tap and damage the thread produced. The consequences of cold welds are torn and unclean thread edges. VAP improves the adhesion of lubricants to the tool surface.
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, VA metals.
Thread type | Metric thread |
Thread type x nominal diameter | M6 |
Pitch | 1.00 mm |
Length | 80 mm |
Shank diameter | 4.5 mm |
DIN | 376 |
Surface | Plain |
Form | B |
Shank style | Square-cut |
Last viewed
Gas and combined filter 3M 6075 A1 + formaldehyde
Twist drill bit HSCo DIN 340 type RN OXIDE
Wine chiller stick with integrated pourer
Twist drill bit HSCo DIN 340 type RN OXIDE
Blind-hole machine taps Ruko MF DIN 374 HSCo plain form C
Hexagon nut with fine thread DIN 934, steel I8I, plain
Twist drill bit HSCo DIN 338 type RN oxide
Cover cap For tapping screws, A2 window sill screws, pias window sill screws
Twist drill bit HSCo DIN 338 type RN oxide
Twist drill bit HSCo DIN 338 type RN oxide