Welcome to Würth Aerospace Solutions For trade customers only
Tile adhesive CERAfix<SUP>®</SUP> 403-2 C2 TE S1 Flex/XL - ADH-FLEX-(CERAFIX-403-2)-25KG

Tile adhesive CERAfix® 403-2 C2 TE S1 Flex/XL

Tile adhesive CERAfix 403-2 C2 TE S1 Flex XL
ADH-FLEX-(CERAFIX-403-2)-25KG
CERAFIX

Art.-no. 5875200403
EAN 4052713947673
All versions

Prices for customers after login
Tile adhesive CERAfix® 403-2 C2 TE S1 Flex/XL

Art.-no. 5875200403

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Hydraulically hardening, flexible, highly pourable thin bed and medium bed mortars in accordance with EN 12004 C2 TE S1

Very high degree of flexibility


  • Flexible mortar in accordance with Deutsche Bauchemie e.V. guideline

  • Secure even on surfaces subject to considerable movement


Very versatile


  • Suitable for thin bed and medium bed mortars

  • Can be used on all common surfaces

  • Suitable for all ceramic coverings


Resistant to thawing/freezing alternations


  • Suitable for indoor and outdoor use

  • Can be used in wet rooms and swimming pools exposed to high stresses


Excellent adhesive strength of >1.0 N/mm² and high initial adhesion


  • The positioned tiles adhere immediately, but can still be moved

  • Secure bonding of large and heavy tiles


Supple and therefore easy to apply



Very low emissions - EC1-Plus certified



Resistant to ageing



Suitable for underfloor heating



Suitable for large formats



Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.

Proof of Performance

Tested in line with EN 12004 C2 FE S1


  • Fire behaviour: A1/A1fl

  • Adhesive pull strength after dry storage: ≥ 1 N/mm²

  • Adhesive tensile strength after immersion in water: ≥ 1 N/mm²

  • Adhesive tensile strength after warm storage: ≥ 1 N/mm²

  • Adhesive tensile strength after alternating freezing/thawing stress: ≥ 1 N/mm²

  • Slip resistance: ≤ 0.5 N/mm²


EMICODE EC1plus: Very low emissions: The EMICODE classification system distinguishes the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.

Notice
  • Protect the setting product from solar radiation, draughts, driving rain, frost and excessively high temperatures (≥ +25°C)

  • Material that is already setting must not be subsequently diluted with water

  • In the case of unusually highly absorbent, new or unusual substrates or laying materials, test surfaces must be prepared and the processing guidelines of the respective manufacturer followed.

  • The product has an alkaline reaction to moisture

  • This product is low-chromate according to directive 2003/53/EC, Giscode ZP 1

Tested in line with EN 12004 C2 FE S1


  • Fire behaviour: A1/A1fl

  • Adhesive pull strength after dry storage: ≥ 1 N/mm²

  • Adhesive tensile strength after immersion in water: ≥ 1 N/mm²

  • Adhesive tensile strength after warm storage: ≥ 1 N/mm²

  • Adhesive tensile strength after alternating freezing/thawing stress: ≥ 1 N/mm²

  • Slip resistance: ≤ 0.5 N/mm²


EMICODE EC1plus: Very low emissions: The EMICODE classification system distinguishes the environmental and health compatibility of construction products. The lowest-emission products bear the EC1plus mark.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Polymer-containing tile adhesive for laying in thin beds and medium beds for ceramic coverings, such as stoneware, earthenware, fine earthenware tiles, clinker brick, brick tiles, ceramic mosaics, as well as for split tiles, split quarter bricks and concrete stones for indoor and outdoor use. The tile adhesive is suitable for secure laying on all surfaces in accordance with DIN 18157, Part 1, as well as on hot screeds.


Suitable for installing large-format ceramics.

Instructions

The surface must be solid, load-bearing, clean, dry and free of cracking and separating substances.


In a clean container, mix the tile adhesive (25 kg) with approx. 8 litres of clean, cold tap water, ensuring there are no lumps. Give the product approx. 3 minutes to mature and then stir thoroughly again. Spread a flat layer of the mixed adhesive on the surface and comb through with the toothed trowel suitable for the panel size. Only apply as much mortar as the workable time of 30 minutes allows for laying ceramic tiles or panels into the fresh mortar bed. For more information, please refer to the technical data sheet.

Weight of content

25 kg

Container

Paper bag

Chemical basis

Cement - DIN EN 197, Selected Aggregates - DIN EN 13139, additives and aggregates

Standards

EN 12004

Building material class

A1, fl / A1 - Non-flammable

Colour

Grey

Min./max. processing temperature

5 to 25 °C

Processing time

30 min

May be walked on after max.

12 h

May be walked on in following conditions

at 20°C and 50% relative humidity

Groutable after

12 h

Grouting condition

at 20°C and 50% relative humidity

Full load capacity/conditions

14 d / at 20°C and 50% relative humidity

Shelf life from production/conditions

12 Month / dry storage area

Sustainability

Pollutants / Emissions

Coverage Approx. 1.6 to 1.9 kg/m² using a 6 mm notched trowel
Approx. 2.2 to 2.5 kg/m² using an 8 mm notched trowel
Approx. 2.9 to 3.2 kg/m² using a 10 mm notched trowel
Storage Dry, 12 months in original sealed Würth container, once opened use immediately
Cleaning With water immediately after use
Disposal Dispose of cured product residues under waste code 17 09 04 as common construction and demolition waste.
* At +20°C and 50 % relative humidity; lower temperatures lengthen and higher temperatures shorten the indicated
times.
** The amount of water required is based on empirical values. It may be necessary to add more water
depending on the application.
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Tile dispersion primer CERAfix<SUP>®</SUP> 101
Tile dispersion primer CERAfix® 101

PRIM-(CERAFIX-101)-10LTR

CERAFIX
Solvent-free, ready-to-use, dispersion-based universal primer for indoor and outdoor use
x 1 pcs
Joint mortar CERAfix<SUP>® </SUP>505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm

JNTCOMPD-(CERAFIX-505)-WHITE-5KG

CERAFIX
For natural stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
x 1 pcs
Joint mortar CERAfix<SUP>® </SUP>505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm

JNTCOMPD-(CERAFIX-505)-SILVERGREY-5KG

CERAFIX
For natural stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
x 1 pcs
Joint mortar CERAfix<SUP>® </SUP>505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm

JNTCOMPD-(CERAFIX-505)-MANHATTAN-5KG

CERAFIX
For natural stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
x 1 pcs
Joint mortar CERAfix<SUP>® </SUP>505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm

JNTCOMPD-(CERAFIX-505)-BAHAMABEIGE-5KG

CERAFIX
For natural stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
x 1 pcs
Joint mortar CERAfix<SUP>® </SUP>505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm

JNTCOMPD-(CERAFIX-505)-CONCRETEGREY-5KG

CERAFIX
For natural stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
x 1 pcs
Joint mortar CERAfix<SUP>® </SUP>505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm

JNTCOMPD-(CERAFIX-505)-PLUMBERSGREY-5KG

CERAFIX
For natural stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
x 1 pcs
Joint mortar CERAfix<SUP>® </SUP>505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm

JNTCOMPD-(CERAFIX-505)-ANTHRACITE-5KG

CERAFIX
For natural stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details