Tile levelling crossbeam
Levelling cross-piece
CRSPCE-LEVL
Register now and access more than 125,000 products
- The side wings generate a constant pressure along the joint, in order to guarantee a perfect result up to the curing of the adhesive.
- The crossbeam can be unclamped under tension by applying light pressure to the side in order to clean the joints to clean or correct the joint appearance.
Can only be used in combination with the tile levelling system.
Datasheets(X)
Length | 44 mm |
Height | 33 mm |
Width | 95 mm |
Last viewed
Broom, soft/hard bristles
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Work dungarees
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, blue passivated (A2K)
Tool belt TPP-Gordel
Cover cap for screws with head recess
Hexagon head bolt with shank and fine thread ISO 8765, steel 8.8, zinc flake, silver (ZFSHL)
Hard hat, accessories