Top bracket latch for insect protection
Corner connecting plate, up
CRNCONPLT-F.INSPROT-UP-SCRABL-22MM
Register now and access more than 125,000 products
Scope of delivery:
- 2 x A2 bracket latches
Not suitable for FSR with spring-loaded bracket latches.
The offset is worked out as follows:
Folding dimensions in mm (panel frame thickness)
+ visible brush (depending on model)
+ brush channel (depending on model)
= offset (in mm)
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For FSR with hook-in assembly
 | |
Cranking (a) | 22 mm |
Length 2 (b) | 16 mm |
Length (c) | 39 mm |
Width (d) | 7 mm |
Material | Stainless steel A2 / stainless steel A2 |
Last viewed
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Duplex wire rope clamp A4 stainless steel, with two screws for fastening
Cover cap
Welder clothing
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
1C flat roof seal fleece inlay, roll
Split pin ISO 1234 A4-70 stainless steel, plain
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Hexagon Socket Head Cap Screw