Torque wrench For plug-in tools
Torque wrench with plug-in tool
TRQWRNCH-PLGINTL-16MM(40-200NM)
Register now and access more than 125,000 products
- Special design for hard-to-reach cable glands in confined spaces
- Tool quick-change system with pin locking mechanism guarantees flexible and swift operation.
- Accuracy of ± 3% to the set value
- Simple and precise setting by turning the handle.
- Shank: dia. 16 mm
- Scaling in both newton metres (Nm) and pound-force inches (lbf·in)
- Audible and feelable perception of torque triggering prevents over-tightening of bolts.
- Anti-slip 2-component handle
- After use, relax the spring and set it to lowest value.
- With calibration certificate
 | |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Tip size | 16 mm |
Min./max. torque measuring range | 40-200 Nm |
Min./max. torque measuring range (inches) | 30-150 lbf.in |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 423 mm |
Handle diameter (D1) | 37 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
EPS profile thumbturn cylinder
EU HSCo 60° countersink DIN 334C
W6X profile half cylinder
Tool storage For wooden standing ladders (design from Sept. 2020)/hybrid ladders
Centre-grooved dowel pins ISO 8742 A1 stainless steel plain
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, plain
Engine protective lacquer
Power monier pliers/concretors' pliers
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain
Safety knife Martor Secumax Snitty 4303
