Torque wrench For plug-in tools
Torque wrench with plug-in tool
TRQWRNCH-PLGINTL-16MM(8-60NM)
Register now and access more than 125,000 products
- Special design for hard-to-reach cable glands in confined spaces
- Tool quick-change system with pin locking mechanism guarantees flexible and swift operation.
- Accuracy of ± 3% to the set value
- Simple and precise setting by turning the handle.
- Shank: dia. 16 mm
- Scaling in both newton metres (Nm) and pound-force inches (lbf·in)
- Audible and feelable perception of torque triggering prevents over-tightening of bolts.
- Anti-slip 2-component handle
- After use, relax the spring and set it to lowest value.
- With calibration certificate
Datasheets(X)
 | |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Tip size | 16 mm |
Min./max. torque measuring range | 8-60 Nm |
Min./max. torque measuring range (inches) | 5-45 lbf.in |
ISO | DIN EN ISO 6789-1:2017 |
Length (L1) | 301 mm |
Handle diameter (D1) | 37 mm |
Last viewed
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Material lift box
Occupational shoes
Belt clasps For round eyelets with dia. 40 mm and 42 x 22 mm oval eyelets
1/4 inch socket wrench insert, metric short
EPS profile double cylinder
piasta® drilling screw, hexagon head A2 stainless steel with drill tip and moulded thread made of hardened steel
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain