Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730 Quick Nm
Torque wrench Stahlwille MANOSKOP 730 Quick Nm
TRQWRNCH-STAHLWILLE-50184002-(4-20NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Quick, precise setting using QuickSelect quick adjustment
- Double stop signal
- Very easy-to-read double scale with colour differentiation between Nm/ft-lb and ft-lb/in-lb
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- 2-component handle with ergonomic, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Certificate in accordance with DIN EN ISO 6789-2:2017
- Mount for interchangeable socket tools
- QuickRelease safety lock
- Anti-clockwise tightening by turning the socket tools around
- Display deviation value ± 3 % (size 2; a/2 4 %)
Datasheets(X)
Insert shank square | 9 x 12 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Min./max. torque measuring range | 4-20 Nm |
Length (L1) | 179 mm |
Last viewed
Hexagon socket set screw with flattened tip ISO 4027, steel 45H, zinc flake, silver (ZFSHL)
Workshop scheduler, one row DIN A4
Twist drill bit HSCo DIN 340 type RN OXIDE
Plastic base
Temporary horizontal securing system
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Outer ladder For professional aluminium telescopic ladders
EPS profile double cylinder
Hexagonal bolt with threading up to head
Hexagon Socket Head Cap Screw