Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730 Quick
Torque wrench Stahlwille MANOSKOP 730 Quick
TRQWRNCH-STAHLWILE-50184065-(130-650NM)
Register now and access more than 125,000 products
- Triggered with a double stop signal
- Display deviation value ±4 %
- Does not need to be reset to "0"
- The measuring element is only loaded when tightening
- With mount for interchangeable socket tools
- QuickRelease safety lock
- Locking lever for quick torque adjustment
- Arrow-shaped pointers
- Non-slip adjustment mechanism with thumb recess
- Double stop signal
- Double scale: Nm/ft-lb or Nm/in-lb
- Also available as Nm version without double scale on request
- Ergonomic 2-component handle
- Anti-clockwise tightening by turning the socket tools around
- Further load or impact against the direction of operation does not affect the trigger mechanism
- With calibration certificate
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706
- Easy adjustment using two adjustment points
- Certificate in accordance with DIN EN ISO 6789-2:2017
Datasheets(X)
Insert shank square | 14 x 18 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Tip size | 0 - not applicable |
Min./max. torque measuring range | 130-650 Nm |
Min./max. torque measuring range (inches) | 100-480 lbf.ft |
Length (L1) | 875 mm |
Last viewed
Cetus trousers with holster pockets
Hexagonal bolt with thread up to the head
Work trousers
Work jacket
Hexagonal bolt with thread up to the head
1/2 inch ratchet With turntable switching
Work trousers
ASSY®plus 4 CSMP universal screw Hardened zinc-plated steel, partial thread, countersunk milling pocket head
Threaded rod DIN 976, A2-70 stainless steel, shape A
Jacket Planam BW 290