Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730 Quick
Torque wrench Stahlwille MANOSKOP 730 Quick
TRQWRNCH-STAHLWILLE-50184010-(20-100NM)
Register now and access more than 125,000 products
- Triggered with a double stop signal
- Display deviation value ±4 %
- Does not need to be reset to "0"
- The measuring element is only loaded when tightening
- With mount for interchangeable socket tools
- QuickRelease safety lock
- Locking lever for quick torque adjustment
- Arrow-shaped pointers
- Non-slip adjustment mechanism with thumb recess
- Double stop signal
- Double scale: Nm/ft-lb or Nm/in-lb
- Also available as Nm version without double scale on request
- Ergonomic 2-component handle
- Anti-clockwise tightening by turning the socket tools around
- Further load or impact against the direction of operation does not affect the trigger mechanism
- With calibration certificate
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706
- Easy adjustment using two adjustment points
- Certificate in accordance with DIN EN ISO 6789-2:2017
Insert shank square | 9 x 12 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Min./max. torque measuring range | 20-100 Nm |
Min./max. torque measuring range (inches) | 15-72.5 lbf.ft |
Length (L1) | 370 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Low-cut safety shoe S2
Twist drill bit HSS DIN 1897 type RN
Slotted set screw with tip DIN 553, steel, 14H, zinc-plated, blue passivated (A2K)
Straight screw fitting, metal thread, metric PA6 MOD BS SGA
System drawer cabinet, mobile 8.6: 574x603 mm
Sport Plus S3 FLEXITEC® ESD safety boots
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Self-drilling screw With square drive
Washer ISO 7090 steel 200 HV plain
Cylinder tapping screw, shape C with slot DIN 7971, A2 stainless steel, plain
