Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730 Quick
Torque wrench Stahlwille MANOSKOP 730 Quick
TRQWRNCH-STAHLWILLE-50184030-(60-300NM)
Register now and access more than 125,000 products
- Triggered with a double stop signal
- Display deviation value ±4 %
- Does not need to be reset to "0"
- The measuring element is only loaded when tightening
- With mount for interchangeable socket tools
- QuickRelease safety lock
- Locking lever for quick torque adjustment
- Arrow-shaped pointers
- Non-slip adjustment mechanism with thumb recess
- Double stop signal
- Double scale: Nm/ft-lb or Nm/in-lb
- Also available as Nm version without double scale on request
- Ergonomic 2-component handle
- Anti-clockwise tightening by turning the socket tools around
- Further load or impact against the direction of operation does not affect the trigger mechanism
- With calibration certificate
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706
- Easy adjustment using two adjustment points
- Certificate in accordance with DIN EN ISO 6789-2:2017
Datasheets(X)
Insert shank square | 14 x 18 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Tip size | 0 - not applicable |
Min./max. torque measuring range | 60-300 Nm |
Min./max. torque measuring range (inches) | 50-220 lbf.ft |
Length (L1) | 520 mm |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Manual screw tap, third tap Ruko hand tap HSS DIN 352 third tap
TWINDUR EU SC 90° countersink DIN 335C
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W1/MVQ
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-plated, transparent passivated (A3K)
Hexagon nut with flange and clamping piece (full metal)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain