Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730 Quick
Torque wrench double scale Stahlwille 730 Quick
TRQWRNCH-STAHLWILLE-50584005-(6-50NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Mount for interchangeable socket tools
- QuickRelease safety lock (size 5-65)
- Ergonomically shaped, non-slip adjustment mechanism with thumb recess
- Optimised ball handle for fatigue-free working
- Double stop signal
- Double scale: Nm/ft-lb or Nm/in-lb (size 5-80)
- Also available as Nm version without double scale on request (size 5-65)
- Anti-clockwise tightening by turning the socket tools around
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Certificate in accordance with DIN EN ISO 6789-2:2017
- Display deviation value ± 4 %
Datasheets(X)
Insert shank square | 9 x 12 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Min./max. torque measuring range | 6-50 Nm |
Min./max. torque measuring range (inches) | 50-440 lbf.in |
Length (L1) | 315 mm |
Last viewed
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
LED light strip FLB-24-5 RGB For sticking on
Corridor door mortise lock, PZ class 2
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Button-head rivet
Slotted countersunk head screw DIN 963, steel 8.8, plain
File brush
Identification rings, PVC
Rubber washer, Pak-free SBR/NR 70, 70 ± 7 Shore A
34° half-head collated nails AN