Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730N
Torque wrench Stahlwille MANOSKOP 730N
TRQWRNCH-STAHLWIE-50181100-(200-1000NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Quick, precise setting using QuickSelect quick adjustment
- Double stop signal
- Very easy-to-read double scale with colour differentiation between Nm/ft-lb and ft-lb/in-lb
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- 2-component handle with ergonomic, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Certificate in accordance with DIN EN ISO 6789-2:2017
- Mount for interchangeable socket tools
- QuickRelease safety lock
- Anti-clockwise tightening by turning the socket tools around
- Display deviation value ± 3 % (size 2; a/2 4 %)
Datasheets(X)
Insert shank square | 22 x 28 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Min./max. torque measuring range | 200-1000 Nm |
Min./max. torque measuring range (inches) | 150-750 lbf.ft |
Length (L1) | 1363 mm |
Last viewed
High-performance anchor with threaded bolt
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Screw, hexagon head, inch
T-shaped cutting ring fitting ISO 8434-1, stainless steel 1.4571
Work dungarees Stretch X
Banjo fitting DIN 7642, steel plain, shape E
Safety boots S3
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
EPS profile thumbturn cylinder
Low-cut safety shoes, S3