Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730N
Torque wrench Stahlwille MANOSKOP 730N
TRQWRNCH-STAHLWILLE-50181005-(10-50NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Quick, precise setting using QuickSelect quick adjustment
- Double stop signal
- Very easy-to-read double scale with colour differentiation between Nm/ft-lb and ft-lb/in-lb
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- 2-component handle with ergonomic, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Certificate in accordance with DIN EN ISO 6789-2:2017
- Mount for interchangeable socket tools
- QuickRelease safety lock
- Anti-clockwise tightening by turning the socket tools around
- Display deviation value ± 3 % (size 2; a/2 4 %)
Datasheets(X)
Insert shank square | 9 x 12 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Min./max. torque measuring range | 10-50 Nm |
Min./max. torque measuring range (inches) | 7-37 lbf.ft |
Length (L1) | 330 mm |
Last viewed
Work shirt Daiber 8008 men's basic T-shirt
Plate connector set
Hexagonal bolt with thread up to the head ISO 4017, steel strength class 10.9, zinc flake, silver (ZFSHL)
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Rigid electrical conduit WPKu-EM-F With moulded sleeve on one side
Sleeve cone
Ash handle
Hexagonal bolt with thread up to the head ISO 4017, A2-80 stainless steel, plain
W-VI-A anchor rod A4 stainless steel
Work trousers