Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730N
Torque wrench Stahlwille MANOSKOP 730N
TRQWRNCH-STAHLWILLE-50181012-(25-130NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Quick, precise setting using QuickSelect quick adjustment
- Double stop signal
- Very easy-to-read double scale with colour differentiation between Nm/ft-lb and ft-lb/in-lb
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- 2-component handle with ergonomic, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Certificate in accordance with DIN EN ISO 6789-2:2017
- Mount for interchangeable socket tools
- QuickRelease safety lock
- Anti-clockwise tightening by turning the socket tools around
- Display deviation value ± 3 % (size 2; a/2 4 %)
Datasheets(X)
Insert shank square | 14 x 18 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Min./max. torque measuring range | 25-130 Nm |
Min./max. torque measuring range (inches) | 20-95 lbf.ft |
Length (L1) | 421 mm |
Last viewed
Clamping frame for rubber modules
Hexagonal bolt with shank DIN 931, steel 8.8U, hot-dip galvanised
Hexalobular-type cheese head screw, low head ISO 14580, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Tungsten carbide bur with STEEL teeth
Stud with head, shape B
VDE replacement blade for VDE screwdrivers
Hexagonal bolt with thread up to the head DIN 933, steel 12.9, plain
Hexagon nut, high profile with clamping piece (non-metal insert), imperial
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Low-cut safety shoe S3