Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730N
Torque wrench Stahlwille MANOSKOP 730N
TRQWRNCH-STAHLWILLE-50181020-(40-200NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Quick, precise setting using QuickSelect quick adjustment
- Double stop signal
- Very easy-to-read double scale with colour differentiation between Nm/ft-lb and ft-lb/in-lb
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- 2-component handle with ergonomic, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Certificate in accordance with DIN EN ISO 6789-2:2017
- Mount for interchangeable socket tools
- QuickRelease safety lock
- Anti-clockwise tightening by turning the socket tools around
- Display deviation value ± 3 % (size 2; a/2 4 %)
Datasheets(X)
Insert shank square | 14 x 18 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Tip size | 0 - not applicable |
Min./max. torque measuring range | 40-200 Nm |
Min./max. torque measuring range (inches) | 30-150 lbf.ft |
Length (L1) | 467 mm |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
3/8" cardan joint insert short
Cover cap for screws with head recess
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
Glazing and sealing roller, microfibre polyester
Soft wax
Wire end ferrule without plastic sleeve
3/4-inch impact socket wrench insert hexagon, metric, short
Hammer drill H 28-MLS POWER
Work trousers