Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730N
Torque wrench Stahlwille MANOSKOP 730N
TRQWRNCH-STAHLWILLE-50181102-(4-20NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Quick, precise setting using QuickSelect quick adjustment
- Double stop signal
- Very easy-to-read double scale with colour differentiation between Nm/ft-lb and ft-lb/in-lb
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- 2-component handle with ergonomic, green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Certificate in accordance with DIN EN ISO 6789-2:2017
- Mount for interchangeable socket tools
- QuickRelease safety lock
- Anti-clockwise tightening by turning the socket tools around
- Display deviation value ± 3 % (size 2; a/2 4 %)
Datasheets(X)
Insert shank square | 9 x 12 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Tip size | 0 - not applicable |
Min./max. torque measuring range | 4-20 Nm |
Min./max. torque measuring range (inches) | 40-180 lbf.in |
Length (L1) | 275 mm |
Last viewed
Work trousers
Hexagon housing
Furniture handle screw Z
VARIFIX® L-shaped air duct mounting bracket With integrated sound-absorbing element
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank
Hexagon Socket Head Cap Screw with centre, with low head
Hexagonal bolt with flange in accordance with MBN standard
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Threaded fitting
Slotted countersunk head screw DIN 963, 4.8 steel, plain