Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 730a Quick
Torque wrench Stahlwille 730a Quick
TRQWRNC-STLWIL-50584001-(17,5-87,5INLB)
Register now and access more than 125,000 products
- Triggering
- Ergonomically shaped, non-slip adjustment mechanism with thumb recess
- Optimised ball handle for fatigue-free working
- Double stop signal
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Anti-clockwise tightening by turning the socket tools around
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling
- Comes with certificate
- Display deviation value ± 4 %
Datasheets(X)
Insert shank square | 9 x 12 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Tip size | 0 - not applicable |
Min./max. torque measuring range (inches) | 17.5-87.5 lbf.in |
Length (L1) | 179 mm |
Last viewed
Threaded plug GPN 720, shape A Polyethylene (PE-LD), yellow
Article sticker
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated
SC Speedcut aluminium end mill, long corner radius, optional, triple blade, variable helix DIN 6527L
HPC Speedcut 4.0 Universal end mill, long, optional, four blades, uneven angle of twist gradient DIN 6527L, HB shank
Wood screw Hexagon head DIN 571, A2 stainless steel
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Eye bolt DIN 444, A2 stainless steel, plain, shape B
Spring lock washer, shape B DIN 137, spring steel, plain, shape B crimped