Torque wrench for plug-in torque wrench head Stahlwille MANOSKOP® 755
Torque wrench Stahlwille MANOSKOP 755
TRQWRENCH-STAHLWILLE-50010004-(4-40NM)
Art.-no.
1971013836
EAN 4099618473661
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For working on production lines or in series production
- No adjustment scale; adjustment with test equipment required, e.g. with STAHLWILLE test device no. 7707 W, SmartCheck or calibration systems no. 7794, no. 7706.
- Triggering
- Mount for interchangeable add-on torque wrench heads (755/4-30)
- Double stop signal
- Particularly lightweight and practical
- Handle and shank made of square steel tube
- Further load after triggering or impact against the direction of operation (up to the measuring range limit of the torque wrench) does not affect the trigger mechanism, thereby protecting it from damage
- Reversible plug-in torque wrench heads for anti-clockwise tightening
- Available with preset trigger value on request (10 % surcharge)
- Adjustment with torque wrench test device
- Display deviation value ± 4 %
Product information
Datasheets(X)
Insert shank square | 9 x 12 mm |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Min./max. torque measuring range | 4-40 Nm |
Min./max. torque measuring range (inches) | 3-30 lbf.ft |
Length (L1) | 202 mm |
Last viewed
Universal protector W.TEC® COVER CAP WP 600 Polyethylene, red
Countersunk rivet
Shim ring For Standard clamping element
Countersunk screw with hexalobular head
Cable grommet with cross recess membrane, TPE
HSCo8 end mill, short, centre-cutting DIN 844K
Rubber modules, small
Fixanchor W-FAZ/S
Threaded connector For pneumatic air nozzles
Long-life & speed diamond wet core bit 1/2 inch