Torque wrench, reversible ratchet 1/4 inch Stahlwille MANOSKOP® 755R/1
Torque wrench Reversible ratchet Stahlwille 755R/1
TRQWRENCH-STHLWIL-50100001-(1,5-12,5NM)
Register now and access more than 125,000 products
- For working on production lines or in series production. No adjustment scale; adjustment with test equipment required, e.g. with STAHLWILLE test unit no. 7707 W, SmartCheck or calibration units no. 7794, no. 7706.
- Independent of force application point
- Triggering
- Double stop signal
- Particularly light and practical
- Handle and shaft made of square steel tube
- Further load or impact against the direction of operation (up to the measuring range limit of the torque wrench) does not affect the trigger mechanism, thereby protecting it from damage
- Available with preset trigger value on request (10 % surcharge)
- Adjustment with torque wrench test device
- Display deviation of ± 4 %
Datasheets(X)
Tip size | 1/4 inch |
Min./max. torque measuring range | 1.5-12.5 Nm |
Min./max. torque measuring range (inches) | 1-9 lbf.ft |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Length (L1) | 173.5 mm |
Ratchet head height with square (B2) | 18 mm |
Ratchet head width (D2) | 22 mm |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
VLB 60 3D door hinge
Work poloshirt
IPA isopropanol cleaner
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Threaded fitting, stainless steel, with ball joint
TIPP® Priopress pipe clamp with joint
Replacement spray head For spray cans
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Labelling tape