Torque wrench with 1/2 inch reversible ratchet Stahlwille MANOSKOP® 721 Quick
Torque wrench reversible ratchet Stahlwille 721
TRQWRENCH-STAHLWILE-50204015-(30-150NM)
Register now and access more than 125,000 products
- Triggering
- Does not need to be reset to "0" as the measuring element is only loaded when tightening
- Rapid adjustment using the convenient clamping lever in the handle or the ergonomically shaped, non-slip adjustment mechanism with thumb recess
- Optimised ball handle for fatigue-free working/double stop signal
- Double scale: Nm/ft-lb
- Further load after triggering or impact against the direction of operation, e.g. in the case of seized screws, does not affect the trigger mechanism, thereby protecting it from damage.
- Robust steel tube housing protects all sensitive parts
- Calibration using perfectControl® calibrating unit no. 7794 or calibration system no. 7706. Can be readjusted as required without dismantling.
- Certificate in accordance with DIN EN ISO 6789-2:2017/display deviation value ± 4 %
Datasheets(X)
External drive | 0 - not applicable |
Min./max. torque measuring range | 30-150 Nm |
Min./max. torque measuring range (inches) | 25-110 lbf.ft |
Length (L1) | 452 mm |
Tip size | 1/2 inch |
Last viewed
Panel bracket set F8 Nova Pro Scala
Multi-purpose grease construction/agriculture
Threaded fitting
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Die holder DIN EN 22568 Performance
Ball joint puller bell Vibro-Impact, 35-mm forked opening 3 pieces
Turnbuckle with hook and eyelet DIN 1480, steel, zinc-plated, blue passivated (A2K)
Low-cut safety shoes S3
Hexagonal bolt with shank
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm