Welcome to Würth Aerospace Solutions For trade customers only

Touch-up varnish Spot Finisher

Touch-up varnish Spot Finisher
CLRLACSPR-(SPOT-FINISHER)-400ML

Art.-no. 0893345
EAN 4048539704958

Prices for customers after login
Touch-up varnish Spot Finisher

Art.-no. 0893345

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Touch-up paint for homogeneous painting transitions in the edge zones
  • Excellent dissolving capacity

  • Glossy when dry

  • Smooth edges

  • Ideal for repair painting and spot repairs
Notice

Turn the can upside down after use and spray until the nozzle is empty.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Spot repair, touch ups

Instructions

Generously mat the surface in the transition zone. Shake the can well for approx. 3 minutes before use. Directly after applying 2-component clear lacquer or 2-component top coat, apply in several thin spraying passes in the spraying-mist edge zone of the 2-component clear lacquer or 2-component top coat until a homogeneous transition occurs. Can be applied without a flash-off time. Where necessary, the touched-up area can be polished once completely dry (12 hours at 20°C, IR approx. 15 min.).

Chemical basis

Specific resin and solvent combination

Contents

400 ml

Smell/fragrance

Solvent-like

Colour

Transparent

Max. through drying

24 h

Conditions for through drying

at 20°C

Container

Aerosol can

Density

0.959 g/cm³

Density conditions

at 20°C, DIN 53217

Viscosity conditions

at 20°C

Min. proportion of solids

2.6 %

Shelf life from production

36 Month

Suitable glove:
 
Product
Description
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 2
Gas-tight and resistant to exhaust gases produced by combustion processes
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 2
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 3
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information