Towel rail Extendable
Towel holder aluminium extendable
CABFITT-BATH-TWLHOLDER-ANOD-1ARM-L306MM
Register now and access more than 125,000 products
Material:
- Aluminium guide rail, silver anodised
- Towel rail holder made from 16-mm thick tubular steel, chrome-plated, with grey plastic cover caps
End caps on the guide rails made from grey plastic with retainer lugs, which are locked when the pull-out is closed or extended
Flexible, as can be installed to side (right or left) or on the top shelf
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Steel/aluminium |
Surface | Chrome plated |
Design | One-armed |
Length | 306 mm |
Extension length | 152 mm |
Last viewed
Straight pin, unhardened DIN 7, A1 stainless steel, plain
Hole saw HW
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hexalobular-type cheese head screw ISO 14579, A2-070 stainless steel, plain
ISO insert holder with P clamping system for TN indexable inserts
W-VD-A/F W-VD-A anchor rod hot-dip galvanised steel
Locking system DUAL
Half-head strip nail, 34°, with ring-shaped shaft Steel, zinc-plated yellow (A2C)