Tractor oil TRIATHLON® STOU 10W-40
Tractor oil TRIATHLON STOU 10W-40
ENGOIL-(TRACTOR-STOU)-10W40-60LTR
TRIATHLON
Register now and access more than 125,000 products
Triathlon oils for agricultural applications are produced and packaged in compliance with the most stringent quality specifications in accordance with DIN EN ISO 9001
- High level of product safety
- Comprehensive manufacturer approvals
Only high-quality first raffinates and raw materials are used for Triathlon oils
Fulfils key specifications of automotive manufacturers
Universal oil STOU (= Super Tractor Oil Universal)
Protects against wear and is oxidation-stable
ACEA E2 API CF-4/SF/GL 4
Observe the operating specifications provided by the tractor manufacturer. Compatible with all commercially available engine oils. However, it is only fully effective when used unmixed.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
Especially well-suited for engines (see recommendations), manual gearboxes and final drives, hydraulic systems, turbo clutches and immersion-bath brakes
Contents | 60 l |
Type of oil | Mineral |
Viscosity grade | 10W-40 |
Approved for engine oils | API CF 4, API SF, API GL 4, ACEA E2 |
Recommended applications for engine oils | ZF TE-ML 06B, ZF TE-ML 07B, MB 227.1, MB 228.1, David Brown, Fendt, KHD, Mack EO-K, Mack EO-K2, Massey Ferguson M1139, Massey Ferguson M1144, Massey Ferguson M1145, MIL-L 46152 C, MIL-L 2104 D, MIL-L 2105, Steyr, Allison C4, Caterpillar TO-2, John Deere J27, Ford New Holland M2C 159-C, Ford New Holland M2C 159-B, Ford New Holland M2C 84-A, CASE (IHC) B6 |
Shelf life from production | 60 Month |
Density | 0.875 g/cm³ |
Density conditions | at 15°C |
Min. flashing point | 230 °C |
Pour point | -33 °C |
Last viewed
EPS profile thumbturn cylinder for keyed alike systems with original equipment
Particle board screw
Article sticker
VARIFIX® c-assembly rail 41/44
Work trousers
Machine tap Speedtap 4.0-Ultra Hard Steel 63 HRC, straight grooved For metric ISO fine thread DIN 13
Cut-resistant gloves Showa 4561
Screw for ISO S clamping system
1/2" multi-socket wrench one tool for all applications
O-ring, metric