Tractor oil TRIATHLON<SUP>®</SUP> UTTO 10W-30 - ENGOIL-(TRACTOROIL-UTTO)-10W30-60LTR

Tractor oil TRIATHLON^® UTTO 10W-30

Name: Tractor oil TRIATHLON ® UTTO 10W-30
Brand: Würth
SKU: 0897010304

Tractor oil TRIATHLON UTTO 10W-30
ENGOIL-(TRACTOROIL-UTTO)-10W30-60LTR
TRIATHLON

Art.-no. 0897010304

EAN 4049557753393

All versions

Similar products

Prices for customers after login

Tractor oil TRIATHLON^® UTTO 10W-30

Art.-no. 0897010304

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Multi-purpose oil for forestry and agricultural machinery

Advanced multigrade oil (UTTO = Universal Tractor Transmission Oil)

Specifically for forestry machinery and agricultural machinery.

Reduces the types of oil required

For use in gearboxes, hydraulic systems and wet brakes.

Notice

Observe the operating specifications provided by the tractor manufacturer. Compatible with all commercially available engine oils. However, it is only fully effective when used unmixed.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Especially well-suited for modern combined drive systems (gearbox/hydraulic system), including wet brakes

Contents	60 l
Type of oil	Mineral
Viscosity grade	10W-30
Approved for engine oils	API GL 4
Recommended applications for engine oils	John Deere J20D New Holland M2C 41B New Holland M2C 48B Ford M2C-86-B Ford M2C-53-A Ford M2C-134-A Ford M2C-134-B Ford M2C-134-C Ford M2C-134-D Allison C4 Caterpillar TO-2 CASE (IHC) MS 1204 CASE (IHC) MS 1205 CASE (IHC) MS 1206 CASE (IHC) MS 1207 CASE (IHC) MS 1209 Massey Ferguson M1135 Massey Ferguson M1141 Massey Ferguson M1143 Massey Ferguson M1145 SAME- Lamborghini Fendt Deutz Schlüter Landini Renault Volvo BM WB 101 AGCO Q-1826 CASE (IHC) B6
Shelf life from production	60 Month
Density	0.885 g/cm³
Density conditions	at 15°C
Min. flashing point	230 °C
Pour point	-36 °C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.