Welcome to Würth Aerospace Solutions For trade customers only
Tungsten carbide bur with STEEL teeth - MILBIT-TC-KUD-STEEL-D10-WL9MM Tungsten carbide bur with STEEL teeth - MILBIT-TC-KUD-STEEL-D10-WL9MM Tungsten carbide bur with STEEL teeth - MILBIT-TC-KUD-STEEL-D10-WL9MM
Tungsten carbide bur with STEEL teeth - MILBIT-TC-KUD-STEEL-D10-WL9MM - 1
Tungsten carbide bur with STEEL teeth - MILBIT-TC-KUD-STEEL-D10-WL9MM - 2
Tungsten carbide bur with STEEL teeth - MILBIT-TC-KUD-STEEL-D10-WL9MM - 3

Tungsten carbide bur with STEEL teeth

Tungsten carbide bur with STEEL teeth
MILBIT-TC-KUD-STEEL-D10-WL9MM
ZEBRA

Art.-no. 0616533100
EAN 4056807674711
All versions

Prices for customers after login
Tungsten carbide bur with STEEL teeth

Art.-no. 0616533100

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

High-performance milling bit with innovative tooth geometry for an outstanding cutting performance when processing steel and cast steel.
  • Up to 50 % higher cutting performance for machining steel and cast steel compared to burs with conventional double cut system

  • Aggressive milling behaviour, large chips, high material removal rate

  • Good handling

  • Workpiece is protected due to significantly reduced heat development

  • Manufactured in accordance with strict quality standards including full inspection of soldered connections

  • Sustainable product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified® Bronze
Notice

Wear appropriate protective equipment when using the sanding tip, such as eye protection, hearing protection and protective gloves. Please note the recommended rotation speed (n) and cutting speed (Vc) for the material being processed as well as the tool/material assignments in the overview tables. Before using the sanding tip, please ensure that the tip rotates properly and that the clamping function on the tool drive works correctly. Do not choose a clamping length that is too small. We recommend a minimum clamping length of approx. 2/3 of the shaft length. Discolouration may occur on the shaft due to the extremely high cutting performance. This discolouration is caused by the extremely high temperature that the tool reaches and does not pose a safety risk. Materials are generally processed in reverse rotation. Suitable tool drives: flexible shaft drives, straight grinders, robots, machine tools.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Deburring, working contours, surface machining, weld seam processing, shaping, chamfering and rounding edges

Form

Ball shape

Head diameter x cutting edge length

10 x 9 mm

Length

54 mm

Shank diameter

6 mm

Material to be processed

Steel, Cast metal

Quality

ZEBRA-Premium

Teeth type

STEEL

Cutting material

Carbide

Surface

Plain

Service life (points system)

3 of 4 points

Cutting efficiency (point system)

4 of 4 points

Surface quality/finish (points system)

2 of 4 points

Versatility (points system)

1 of 4 points

Guiding behaviour (point system)

3 of 4 points

Shank style

Cylindrical

For dia. 6.0-10.0
Material designation Tensile strength Dia. 6.0 Dia. 8.0 Dia. 10.0
vc n f n f n f
from to from to from to from to
Steels
General structural steels ≤ 850 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Unalloyed quenched and tempered steels ≤ 850 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Low-alloy quenched and tempered steels ≤ 850 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Unalloyed quenched and tempered steels ≤ 1,000 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Low-alloy quenched and tempered steels ≤ 1,000 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Alloyed quenched and tempered steels ≤ 1,200 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Nitriding steels ≤ 1,200 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Tool steels ≤ 1,200 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
High-speed steels ≤ 1,200 N/mm² 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Cast metals
Cast iron ≤ 350 HB 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Spheroidal graphite and malleable iron ≤ 350 HB 450 750 24000 40000 18 18000 30000 25 14000 24000 31,5
Key
vc = cutting speed [m/min]
f = feed [mm/r]
n = rotation speed [rpm]
The suggested cutting values are reference values and must be adapted to the respective conditions.
For dia. 12.0
Material designation Tensile strength Dia. 12.0
vc n f
from to from to
Steels
General structural steels ≤ 850 N/mm² 450 750 12000 20000 37
Unalloyed quenched and tempered steels ≤ 850 N/mm² 450 750 12000 20000 37
Low-alloy quenched and tempered steels ≤ 850 N/mm² 450 750 12000 20000 37
Unalloyed quenched and tempered steels ≤ 1,000 N/mm² 450 750 12000 20000 37
Low-alloy quenched and tempered steels ≤ 1,000 N/mm² 450 750 12000 20000 37
Alloyed quenched and tempered steels ≤ 1,200 N/mm² 450 750 12000 20000 37
Nitriding steels ≤ 1,200 N/mm² 450 750 12000 20000 37
Tool steels ≤ 1,200 N/mm² 450 750 12000 20000 37
High-speed steels ≤ 1,200 N/mm² 450 750 12000 20000 37
Cast metals
Cast iron ≤ 350 HB 450 750 12000 20000 37
Spheroidal graphite and malleable iron ≤ 350 HB 450 750 12000 20000 37

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details