Turnbuckle DIN 1480 with weld-on ends, plain steel
TURNBCKL-WELDONEND-DIN1480-M8
Art.-no. 05210108
EAN 4056808539798
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials, especially materials with a higher tensile strength, the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
Last viewed
Metric XZN bit 10 mm hexagon drive
HSS AlTiN SMART STEP sheet metal conical drill bit
Strip for Basixx number plate holder, printed
Drive roller with ridge
ORSY BULL series 5 front loader box for system case with lid
K Plus insulation pipe clamp with separate insulation part
Cable tie KBL INOX made of stainless steel AISI 304 V2A with ball closure
Hexagonal bolt with pin and small hexagon DIN 561, blue passivated zinc plated 8.8 steel (A2K)
Hexagonal bolt with thread up to the head ISO 4017, natural polyamide 6.6
ORSY BULL series 5 drawer box