Turnbuckle closed form DIN 1478, zinc-plated steel
DIN 1478 steel zinc plated closed shape
TURNBCKLNUT-CLSD-DIN1478-(A2K)-M10
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 1478 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M10 |
Last viewed
ASSY® 4 A2 BP slate screw A2 stainless steel plain full thread back panel head
Safety boots, S3
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Breathing mask, disposable
System workbench 1500 mm with 2 height-adjustable workbench feet and drawer wall-mounted cabinet 8.6
Screw, hexagon head w. full thread Inch
O-ring, imperial NBR 70
Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive
Quick-mounting system For floor panels
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)