Turnbuckle closed form DIN 1478, zinc-plated steel
DIN 1478 steel zinc plated closed shape
TURNBCKLNUT-CLSD-DIN1478-(A2K)-M16
Register now and access more than 125,000 products
Turnbuckle sleeves in accordance with DIN 1478 must be assembled with weld-on ends in accordance with DIN 34828 from the same material (S235JR). In this case, the load capacity of the turnbuckle sleeves is always greater than that of the weld-on ends. When assembled with connecting parts made from other materials—especially materials with a higher tensile strength—the load capacity of the turnbuckle sleeves must be checked separately.
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 1478 |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M16 |
Last viewed
Safety sandals S1
Safety sandals, S1P
Vertical clamp Pro With open support arm
Hexagonal bolt with pin and small hexagon
Washer ISO 7089 brass nickel-plated (E2J)
Ring bolt H.Q.E. with variable screw length
Helical insert W.TEC® INSERT COIL Free Running
Jacket Planam MG 290
Wet sandpaper sheet Klingspor PS 11 A
Hexagonal bolt with shank and fine thread DIN 960, steel 10.9, zinc-plated, blue passivated (A2K)